|
| |
|
|
Study of the properties of cement composites with polypropylene fiber modified low-temperature plasma
Žižková, Lucie ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Plasma treatment of polypropylene fibers presents a new progressive method, how to increase the utility properties of these fibers. The thesis is focused on verifying the effect of surface treatment of polypropylene fibers in concrete with low-temperature plasma discharge in the normal atmosphere. The paper describes the procedure for treatment of polypropylene fibers with low-temperature plasma and evaluate the impact of this adjustment on the volume changes of cement composites. It should also be emphasized that the thesis is focused on the initial volume changes, ie volume changes in the early stages of solidification and only for your own mixture, which is not considered an external load. Subsequently, the experimental verification of the effect of the addition made commercially available fibers and fibers treated plasma volume changes to a selected physico-mechanical properties of the test compounds.
|
|
|
Numerical support for description of behavior of cement based composite during fatigue test
Holušová, Táňa ; Padevět,, Pavel (referee) ; PhD, Ladislav Řoutil, (referee) ; Seitl, Stanislav (advisor)
The presented dissertation thesis is focused on analysis of alternative test method for determination of mechanical parameters of cement based composites. A disk shaped specimen with diameter 150 mm, thickness 60 mm was analysed and its modification for use on compact tension test (CT). Such a test is hereinafter referred to as modified compact tension (shortly MCT or MDCT)). This test configuration was chosen for testing the static and fatigue properties of cement based composites precisely because of its traditional use for fatigue testing of metallic materials. Specimens with a different cross-sections can also be used for MCT, but the work is exclusively focused on circular specimen, for example because it could be easily cut from drill core taken directly from the existing structure, on which the properties are more relevant to the age of the used concrete of the controlled structure. The modified compact tension test was firstly calibrated by numerical simulations involved the tuning of the shape of the numerical model and used material models of concrete and steel. Then the laboratory testing of modified compact tension on several levels were performed. The adequacy of the numerical model was verified against the pilot laboratory testing of the MCT test. Furthermore, the comparison of the modified compact tension test and its suitability for determining of fracture mechanical parameters of cement based composites with the three point bending test, which is the standardized test configuration for these purposes was performed. Another laboratory testing was focused of determining of fracture mechanical parameters of concrete mixture classified in strength class C30/37 and the pilot study of fatigue parameters of the same strength class of the concrete mix. The work was also presented numerical simulations of the push-out test, focused on the connection of concrete and steel with epoxy adhesive.
|
|
|
Analysis of stress state and failure in test specimens used for determination of fracture-mechanical parameters of quasi-brittle materials
Holušová, Táňa ; Seitl,, Stanislav (referee) ; Veselý, Václav (advisor)
The thesis is focused on a test on determination of the fracture-mechanical parameters of quasi-brittle materials, especially concrete. What is referred to as the wedge-splitting test is considered, for which a variety of shapes of notched specimen can be used. This work is exclusively focused on the cylinder-shaped specimen of diameter 150 mm and breadth of 100 mm. The test is performed virtually using Atena 2D FEM software. Progress of failure is observed during loading of the specimen for various notch lengths. The amount of energy released for the development the failure outside of the tested cross-sectional area (weakened by the notch) is quantified and the size of the fracture process zone is investigated. The described analysis is performed for several material sets witch differ in cohesive properties of the quasi-brittle material expressed via the so-called characteristic length. Suitable proportions of the test specimen are sought, in order to avoid the failure and thus also the energy dissipation outside of the specimen ligament area during the experimental tests, which shall lead to more accurate estimates of fracture-mechanical parameters of the tested material.
|
|
|
Cement Composite for 3D Printing Technology
Lipoldová, Marie ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
3D printing technology represents a fast-growing industry within many industrial sectors. This bachelor thesis is focused on possibilities of using 3D printing technology in building industry. In the theoretical part there are stated typical technologies and realizations of 3D printing in the field of construction. The thesis also includes a research which is essential for the determination of requirements for cement composites for 3D printing technologies including tests for verification of their properties. The experimental part of the bachelor thesis is focused on testing of various recipes of cementitious composites, especially on the properties of both fresh and hardened composites. Two batches were tested for the suitability of utilisation of waste PET particles.
|
|
|
Use of organic fibers in fine-grained cement composites and their influence on the monitored properties
Mazán, Tomáš ; Ondráček, Michal (referee) ; Křížová, Klára (advisor)
The diploma thesis describes the possibilities of using organic fibres to improve the properties of cement composites at high temperatures. The theoretical part of the thesis deals with the behaviour of the different components of concrete and concretes in fire. A substantial part is devoted to the types of fibres, the method of dosage and the effect of their use on selected parameters. The practical part of the thesis is based on the developed methodology. On the basis of the results obtained, a summary of the behaviour and transformations of different types of organic fibres when exposed to temperatures from 20 to 800 °C was compiled. Furthermore, the observed parameters and the effect of the fibres, especially on the strength of the composite loaded at high temperature, are evaluated. The final of thesis concludes with recommendations for fibre dosage and the suitability of using recycled fibres.
|
|
|
Numerical support for description of behavior of cement based composite during fatigue test
Holušová, Táňa ; Padevět,, Pavel (referee) ; PhD, Ladislav Řoutil, (referee) ; Seitl, Stanislav (advisor)
The presented dissertation thesis is focused on analysis of alternative test method for determination of mechanical parameters of cement based composites. A disk shaped specimen with diameter 150 mm, thickness 60 mm was analysed and its modification for use on compact tension test (CT). Such a test is hereinafter referred to as modified compact tension (shortly MCT or MDCT)). This test configuration was chosen for testing the static and fatigue properties of cement based composites precisely because of its traditional use for fatigue testing of metallic materials. Specimens with a different cross-sections can also be used for MCT, but the work is exclusively focused on circular specimen, for example because it could be easily cut from drill core taken directly from the existing structure, on which the properties are more relevant to the age of the used concrete of the controlled structure. The modified compact tension test was firstly calibrated by numerical simulations involved the tuning of the shape of the numerical model and used material models of concrete and steel. Then the laboratory testing of modified compact tension on several levels were performed. The adequacy of the numerical model was verified against the pilot laboratory testing of the MCT test. Furthermore, the comparison of the modified compact tension test and its suitability for determining of fracture mechanical parameters of cement based composites with the three point bending test, which is the standardized test configuration for these purposes was performed. Another laboratory testing was focused of determining of fracture mechanical parameters of concrete mixture classified in strength class C30/37 and the pilot study of fatigue parameters of the same strength class of the concrete mix. The work was also presented numerical simulations of the push-out test, focused on the connection of concrete and steel with epoxy adhesive.
|
|
|
Cement Composite for 3D Printing Technology
Lipoldová, Marie ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
3D printing technology represents a fast-growing industry within many industrial sectors. This bachelor thesis is focused on possibilities of using 3D printing technology in building industry. In the theoretical part there are stated typical technologies and realizations of 3D printing in the field of construction. The thesis also includes a research which is essential for the determination of requirements for cement composites for 3D printing technologies including tests for verification of their properties. The experimental part of the bachelor thesis is focused on testing of various recipes of cementitious composites, especially on the properties of both fresh and hardened composites. Two batches were tested for the suitability of utilisation of waste PET particles.
|
|
|
Study of the properties of cement composites with polypropylene fiber modified low-temperature plasma
Žižková, Lucie ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Plasma treatment of polypropylene fibers presents a new progressive method, how to increase the utility properties of these fibers. The thesis is focused on verifying the effect of surface treatment of polypropylene fibers in concrete with low-temperature plasma discharge in the normal atmosphere. The paper describes the procedure for treatment of polypropylene fibers with low-temperature plasma and evaluate the impact of this adjustment on the volume changes of cement composites. It should also be emphasized that the thesis is focused on the initial volume changes, ie volume changes in the early stages of solidification and only for your own mixture, which is not considered an external load. Subsequently, the experimental verification of the effect of the addition made commercially available fibers and fibers treated plasma volume changes to a selected physico-mechanical properties of the test compounds.
|
|
|
Analysis of stress state and failure in test specimens used for determination of fracture-mechanical parameters of quasi-brittle materials
Holušová, Táňa ; Seitl,, Stanislav (referee) ; Veselý, Václav (advisor)
The thesis is focused on a test on determination of the fracture-mechanical parameters of quasi-brittle materials, especially concrete. What is referred to as the wedge-splitting test is considered, for which a variety of shapes of notched specimen can be used. This work is exclusively focused on the cylinder-shaped specimen of diameter 150 mm and breadth of 100 mm. The test is performed virtually using Atena 2D FEM software. Progress of failure is observed during loading of the specimen for various notch lengths. The amount of energy released for the development the failure outside of the tested cross-sectional area (weakened by the notch) is quantified and the size of the fracture process zone is investigated. The described analysis is performed for several material sets witch differ in cohesive properties of the quasi-brittle material expressed via the so-called characteristic length. Suitable proportions of the test specimen are sought, in order to avoid the failure and thus also the energy dissipation outside of the specimen ligament area during the experimental tests, which shall lead to more accurate estimates of fracture-mechanical parameters of the tested material.
|
guest ::
